The equipment is mainly used for UAV detection, identification and orientation; It can be freely combined with drone countermeasure equipment or decoy equipment to form a defense system.

It is used for the detection and early warning of UAVs beyond the visual range, which solves the disadvantages of the current UAVS detection equipment, such as large size, high weight, high cost and high power consumption. The system passively intercepts the picture transmission signal and remote control signal between the UAVs and the remote control, and realizes the passive detection and early warning of UAVs. In the flat and unobserved open area of DJI Spirit 4, the farthest detection and positioning horizontal distance of the drone reaches a radius of 7.5KM.

Blacklist and whitelist: You can set a blacklist and whitelist for a specific drone.

Unattended: After automatic defense is enabled, you can enter the unattended mode and independently detect. (When equipped with a strike system, the strike mode is automatically turned on)

Remote control recognition: can recognize ≥ 12 different non-DJI model drone remote controls at one time.

Accurate identification: It can accurately identify the model and unique electronic fingerprint of the drone, and can simultaneously identify the brand and corresponding ID number of ≥35 different drones (identity authentication).

Early warning capability: No need for the UAV to take off, ground boot can be detected, with early warning capability.

The system can be networked by multiple servers to observe the online/abnormal status of each device and control the device, including but not limited to viewing the system operation interface of the device, receiving alarm information, viewing the whitelist, and enabling the defense function.

Visual set control area: Directly plot the UAV defense area through visual operation.

Multi-target discovery, direction finding and positioning: It can realize the direction finding of multiple UAVs at the same time, and display the UAV information of multiple targets on the map at the same time.

The system supports online and offline map switching and street satellite map switching.

Sample establishment and automatic identification, the system built-in sample library, samples include the characteristics of known mainstream UAV manufacturers, and continue to update. Automatically analyze the relevant parameters of the found target, automatically identify the UAV type (brand, model, etc.) according to the built-in sample library, and establish a specific and unique electronic fingerprint archive for the UAV type according to the identified parameter results for later alarm use. At the same time, it can distinguish the same brand, the same model, the same location, the same height of the UAV.