



RF power amplifier modules are mainly used in radio transmission equipment, and are key components that amplify weak RF signals to sufficient strength for effective transmission. They are used in a variety of equipment platforms such as radio transmission systems; they are mainly used to provide supporting equipment/systems such as communications, confrontation, radar, navigation, and suppression confrontation.
High signal quality retention
It can greatly maintain the waveform of the original signal without distortion while amplifying the signal to meet the signal quality requirements of various communication systems.
High efficiency conversion
Adopting advanced circuit design, it can still achieve higher efficiency at high peak power output
High linearity requirements
In communication systems that support multi-carriers, wide bandwidths, and complex modulation formats, the power amplifier module still has high linearity to avoid interference with adjacent channels.
High efficiency and stability
The gain, power level and other parameters can be adjusted through digital signals, and it has multiple self-protection mechanisms such as over-temperature, over-voltage, and over-current.
Product Model | SZMID RF Power Amplifier Module | ||
Frequency Band (MHz) | Output Power | Work Efficiency | Maximum Working Current |
20~1000 | 100W | ≥35% | 12A |
758~788 | - | ≥40% | - |
800~1000 | - | - | - |
1350~1450 | 150W | - | 15A |
1550~1620 | 100W | - | 12A |
1800~2000 | - | - | - |
2000~2200 | - | - | - |
2300~2500 | - | - | - |
2500~2700 | - | - | - |
3400~3600 | 80W | - | 10A |
4800~5000 | - | - | - |
5600~5900 | - | ≥35% | - |
800~2700 | 50W | ≥30% | 6A |
1800~2700 | 80W | - | 10A |
2500~6000 | 30W | ≥25% | 5A |
Gain | 10 dBm | ||
Input VSWR | ≤2.0 | ||
Second Harmonic | ≤-10 dBc | ||
Working Voltage | 0~31.5 dB | ||
Dimensions | Varies with frequency band power | ||
191x95x23 mm | |||
208x133x21.5 mm (repeated) | |||
186x114x21.5 mm |
Covering Europe, America,
Middle East and Asia
pcs shipment in 2023