



Uav detection and combat integrated gun integrates UAV detection and strike functions. The strike gun will not destroy or damage the UAV, and its main working principle is to interfere with the flight control system and signal transmission system of the UAV, so that the UAV can achieve vertical landing or automatic return.
The detection terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and the remote control signal between the UAV and the remote control to realize the passive detection of the UAV. The strike end is mainly for the compulsory control of the UAV or the flying model in the flying state, and the contact between the UAV and the remote control person is cut off at a distance. The interceptor can force the UAV to land or return to the air to ensure the safety of the low-altitude airspace in the region.Cut off all signal communication between the drone and the controller, and the ground controller of the drone can not receive aerial videos and pictures. The drone is unable to locate, forcing the drone to land, hover, or turn back.
The device integrates the UAV detection and strike functions, and a single device can detect and counter the UAV, providing all-round low-altitude protection anytime and anywhere.
Dual-channel detection and six-channel interference can detect and interfere with most of the commonly used signal bands of drones, covering more than 99% of the drone models on the market.
The device adopts high-gain directional antenna, the detection distance can reach 3000m; Transmit high-power interference signals in the same frequency band, and the interference distance can reach 2000m.
The device can choose to open the detection mode or interference mode, interference mode can make the UAV forced return, forced landing, hovering, picture transmission interference, a variety of action modes can be selected.
Use large capacity rechargeable battery and charging equipment, sustainable work for more than 50 minutes, to ensure long-term use.
Very low false alarm rate, especially in complex electromagnetic environment, compared with other devices that generally use spectrum feature comparison, more false alarm rate advantage.
The device is portable, highly maneuverable and is not constrained by any terrain environment, and can be flexibly deployed to all areas that need to be protected against drone intrusion.
One-click automatic search, intelligent detection, the device detects a suspicious signal after the buzzer alarm.
Timely response to the target detection, rapid signal capture, fog, light rain weather conditions work as usual, strong adaptability to the environment.
Model | DZ08-Pro | |
Device Weight | Approx. 8.3KG | |
Device Dimensions (including battery) | Length 850mm * Width 200mm * Height 130mm | |
Antenna Type | Directional | |
Antenna Gain | 9dB | |
Antenna Angle | 60 degrees | |
Power Supply | 24v9.6Ah | |
Operating Time | ≤60 minutes | |
Operating Temperature | -20℃~+55℃ | |
Relative Humidity | 80%RH | |
Expansion Function | Equipped with standard rail, can install scope, night vision device, law enforcement recorder, etc. | |
Jamming Distance | Open area ≥2000 meters (depending on model/environment) | |
Channel Frequencies And Powers | ||
Jamming Frequency/Power | Jamming Frequency | Channel Power |
5.8GHz | 20W~30W | |
800MHz/900MHz/2.4GHz | 30W | |
1.2GHz/1.5GHz | 10W | |
Detection Technical Parameters | ||
Operating Frequency | 2.4GHz, 5.8GHz | |
Direction Finding Method | Directional | |
Detection Types | Quadcopters from brands like DJI, DIY fixed-wing drones, racing drones | |
Detection Distance | Open area ≥3000 meters (depending on model/environment) | |
Alarm Delay | <6 seconds (0~3km) |
Covering Europe, America,
Middle East and Asia
pcs shipment in 2023